| 高速鑽銑攻牙中心機 | |||
| 機型專案 Item Model | 單位Unit | Z540 | |
| 工作臺尺寸 working tale size |
mm | 600×400 | |
| X/Y/Z軸行程 X/Y/Z travel |
mm | 500/400/300 | |
| 主軸端至工作臺距離 Distance between spindle end and table |
mm | 175-455 | |
| 主軸中心至立柱距離 Distance between spindle center and column guide way |
mm | 450 | |
| 工作臺最大負重 Maximum weight of working table |
kg | 250 | |
| 工作臺T型槽 table-T-slot |
mm | 3-14-100 | |
| X/Y/Z軸快速進給 X/Y/Z axis rapid feed |
m/min | 48 | |
| 三軸切削進給 three axis working rapid speed |
mm/min | 10000 | |
| X.Y.Z軸絲桿規格 X.Y.Z axis screw mandrel size |
mm | 2516/2516/3220 | |
| X.線軌規格 X-axis rail size | mm | HGH25CA | |
| Y.線軌規格 Y-axis rail size | mm | HGH25CA | |
| Z.線軌規格 Z-axis rail size | mm | HGH30CA | |
| 夾臂式刀庫arm type tools system | pcs | BT30-14T | |
| 定位精度 positioning accuracy |
mm | ±0.005/300 | |
| 重複定位精度 repeat positioning accuracy |
mm | ±0.003 | |
| 主軸轉速 （標準） spindle speed |
rpm | 10000 | |
| 主軸端錐度 spindle taper |
mm | BT30/100 | |
| 控制器系統 control system |
/ | MITSUBISHI-M70VB | |
| 主軸電機扭力 torque force of spindle motor |
kw | 5.5 | |
| X/Y/Z電機扭力 torque force of X.Y.Z motor |
nm | 2010-10-20 | |
| 氣壓要求 pneumatic source requirement |
Kg/Cm2 | 6 | |
| 電力消耗 power consumption |
kva | 15 | |
| 外形尺寸約 machine size |
mm | 2200*2000*2380 | |
| 機械重量約 machine weight |
kg | 2800 | |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
