powerful 450 W fiber laser. It comes with a hand piece
with an integrated wire feed (wire thickness 0.6 mm) with
automatic feed, with which homogeneous welding can
be carried out. During the welding process, the welding
seam width can be adjusted manually. The hand piece
is attached to a 3.5 m long energy chain and weighs no
more than 1.5 kg. Thus, it is very easy to handle and fle-
xible to use.
The AL-ARM welding system is completed by a 3D visua-
lization. This is realized by means of (pass-through) 3D la-
ser protection goggles, which show the surrounding and
the welding task simultaneously. The welding area is en-
larged and the process-relevant data, e.g. the crosshair, is
superimposed.
Laser safety is of great importance: The integrated mate-
rial recognition allows the welding process only when the
hand piece is placed on the workpiece. This avoids direct
laser radiation being emitted uncontrolled. The built-in
laser safety circuit is approved by TüV Süd.
By using the laser system AL-ARM, laser welding of po-
res, ripples and offset seams can be carried out in a mo-
bile, fast and extremely flexible manner.
Technical data
Wave length 1070 nm
Average power 450 W
CW-power 450 W
Peak pulse power 4500 W
Pulse energy 45 J
Pulse duration 0.2 ms - CW
Pulse frequency Single pulse - 100 Hz
Electrical connection 3-phase, 16 A
Operating modes Pulsed / CW
Focal spot 0.3 - 4 mm
Focal distance 120 mm
Pulse shaping adjustable
Energy chain length 3.5 m
Weight hand piece 1.5 kg
Weight AL 450 F 120 kg
注：聯(lián)系我時，請說是在“傲立機床網(wǎng)”上看到的，謝謝！
