一、技術說明
該機可用于磨削各類形似半圓角或反錐角的高速鋼和硬質合金雕刻刀具和單邊或多邊刀具。磨削分度頭可在24種位置下操作以便于磨削任何角度和形狀,只需替換分度頭上的附件而不需任何復雜的步驟就可進行立銑刀、雕刻刀、鉆頭、車刀、球頭立銑刀的磨削。
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained, free 3600 or 100 rotation is allowed for grinding End Mills、Twist Drill、Lathe Tools, only replace the attachment to the index head without any complex setup.
二、技術參數與標準配備
技術參數:(Technical Data)
|
標準配備:(Standard Accessory)
|
1.可調式金剛石砂輪修整器1個
|
|
Max. Collect Capacity ф25mm
|
Wheel dresser with diamond 1pcs
|
2.最大磨削直徑ф100mm
|
2.砂輪座1個
|
Max. Grinding Dia. ф100mm
|
Wheel flange(mounted) 1pcs
|
3.錐角角度0°-180°
|
3.磨削砂輪1個
|
Taper Angle 0°-180°
|
Grinding wheel 1pcs
|
4.后角角度0°-45°
|
4.R8夾頭Φ4,6,8,10,12mm5個
|
Relief Angle 0°-45°
|
R8 CollectΦ4,6,8,10,12mm5pcs
|
5.反錐角角度0°-26°
|
5.傳動帶1個
|
Negative Angle 0°-26°
|
Drive belt 1pcs
|
6.砂輪轉速5200轉/分
|
6.鎖銷1個
|
Grinding Spindle 5200r.p.m.
|
Lock pin 1pcs
|
7.杯形砂輪規格100x50x20mm
|
7.照明燈1個
|
Cup grinding wheel 100x50x20mm
|
Lamp 1pcs
|
8.電機功率0.375kw 380V/ 50Hz
|
|
Motor 380V/50Hz
|
Tools 1sets
|
9.凈重45kgs
|
10.對準桿1個
|
Net Weight 45kgs
|
Aligning finger 1pcs
|
11.全英文或中文操作說明書1 Sets
|
|
Machine dim. 45x40x35cm
|
Operating information 1 Sets
|
11.包裝規格55x45x47cm
|
|
Packing dim. 55x45x47cm
|
|
注:聯系我時,請說是在“傲立機床網”上看到的,謝謝!