床身上最大回轉直徑 Max.swing diameter over bed 250(mm)
刀架上最大回轉直徑 Max.workpiece diameter over carriage 130
最大工件長度 Max.length of workpiece between centres 450.700
最大切削長度 Max.cutting length 420.660
主軸錐孔錐度/通孔 Taper of hole in spindle/Hole MTNo.4/φ27/
主軸轉速范圍 Range of spindle Speed (6steps) 6級115-1620r.p.m
縱向進給量范圍 Range of carriage longitudinal feed per revelution of spindle 0.05-0.1mm/r
車削 公制/英制 Range of screw thread(metric/inch)
螺紋 20kinds 20級0.2-3.5/8-56.t.p.i
范圍 模數 Range of screw thread(mod) 10kinds 10級0.2-1.25
電機 Motor 0.55;0.75KW;
最大鉆孔直徑 Max.drilling diameter 16
最大立銑刀直徑 Max.diameter of vertical milling cutter 20
最大立銑刀盤直徑 Max.diameter of vertical milling face 63
主軸錐孔錐度 Taper of hole in spindle nose MT No.3
主軸箱移動行程 Max.distance between spindle box 160
主軸套筒移動行程 Max.quill movement of spindle 80
主軸箱水平回轉角度 Max.horizontal rotation of spindle box around column ±180°
主軸箱左右傾斜角度 Max.inclination of spindle box (left right) ±90°
主軸轉速范圍 Range of spindle speed (4steps) 4級400-1640r.p.m
電機 Motor 0.55;0.75KW;
|
隨機附件 Standard Accessory
|
|
|
頂尖莫氏 No.2 Centre Morse No.2 1pc
頂尖莫氏 No.4 Centre Morse No.4 1pc
內六角扳手 Inner hex. spanner 1pc
單頭扳手 Single head spanner 3pcs
掛輪 Change gear 1set
“T”槽工作囊 "T" slot tavle
（用于BB25-3型）(use for Model BB25-3) 1pc
|
|
|
選購 Optional Accessory
|
|
|
四爪卡盤φ125 Four jaw chunk 1set
跟刀架 5-30 Follow rest 1set
中心架 5-50 Steady rest 1set
帶接丙鉆夾頭 φ1-13 莫氏 No.3 Drilling jig with shank 1set
銑夾頭 4，5，6，8，10，12，14，16 Milling jig 1set
平口鉗90mm Plain vice 90 mm 1set
帶分度盤回轉工作臺 Rotary table with indexing plate 1set
掛輪 Change gear Z40,Z45,Z55,Z60,Z75,Z80,Z110 1set
機座 Base frame 1set
|
|
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
